Tuesday, April 17, 2018

Photopolymer Intaglio Process used in Character Traits

The intaglio printing process I am using in Character Traits is fairly standard, with just a few peculiarities based on my use of photopolymer plates. For most of the plates, particularly those with thicker line work, I need to modify the ink I'm using by adding a substantial quantity of magnesium carbonate. Without the magnesium, the ink is too easily wiped out of the lines prior to printing, and, during printing, has trouble holding a crisp edge. Polymer plates also present some difficulty during the inking and wiping process due to their light weight—they don't want to sit still, and an already messy process quickly becomes unmanageable. To compensate, I am taking advantage of the plates' steel backing by sticking them on Bunting magnetic bases while inking and wiping. This keeps the plate in place and gives me a larger surface on which to work. To protect the surface of the magnetic bases I place a sheet of stiff cover stock between plate and base. The paper barrier also makes lifting the plate from the magnet much easier than it would be otherwise. 

For most plates, the steps are as follows: 
Place the plate down on the paper-covered magnetic base  


Draw ink across the plate with a plastic squeegee, rocking the edge back and forth to force the ink into the larger areas; scrape the surface of the plate with the squeegee to remove excess ink
Wipe with tarlatan twice (with each tarlatan session I use progressively cleaner pieces of material to prevent ink transferring back to the plate from the tarlatan)
Wipe with the edge of my hand vertically, horizontally, and at 45 degrees. Then wipe a third time with tarlatan
Lift the plate off the magnetic base and use a galley magnet to hold the plate while wiping the edges with mineral spirits


Place a cleaner sheet of paper on the base before replacing the plate (throughout the edition I regular change these sheets of paper to prevent ink transferring back from the paper to the plate during wiping)
Wipe with tarlatan and then polish with newsprint, repeating this process once or twice depending on the plate

Clean the edges one last time
Place the plate on the bed of the press
Then Nancy places the dampened sheet of paper, cranks the press and lifts the print, after which we begin the process again



Sunday, April 8, 2018

Frank Worsley plate from Character Traits


The idea for Character Traits took root while reading The Europeans by Henry James in 2011. As I read the book I found myself copying out a surprisingly long list of descriptions of the novel’s characters. For some time afterward I toyed with the idea of making a lettering book in which I designed unique lettering for each of James’ descriptions. Eventually I put the idea in the back of my mind and went on to other things. Then in 2013, I was struck in quick succession by a few different descriptions of human character traits, most poignantly one by Frank Worsley, the Captain of Ernest Shackleton’s Endurance expedition: “The rapidity with which one can change one’s ideas…and accommodate ourselves to a state of barbarism is wonderful.” Suddenly, the lettering book idea came back to me, but with an added depth. Rather than a specimen of lettering inspired by Henry James’ insightful humor, I began to imagine a book in which the texts reflected a broader picture of the human experience, touching on some of the darker (and/or comedic) realities of the human condition. I began gathering texts in notebooks as I came across them. 

For Worsley's text I wanted lettering that progressively changed from more to less familiar, skirting the edge of illegibility but not quite getting there. Below are two early sketches of the plate, as well as the finished print from both the standard (one color) and deluxe (two colors) editions of Character Traits.